APR ECU UPGRADE - 3.0T (991.2)

Product Description

Features:

• Horsepower - More horsepower throughout the whole rpm band
• Torque - More torque throughout the whole rpm band
• Warranty - APR Plus is available, providing a factory term limit matching limited powertrain warranty
• Stages - Multiple performance levels depending on installed hardware
• Mode Switching - Switchable power levels and features through Porsche Normal, Sport, and Sport+ profiles
• Flat Torque - Optional torque limited version for a flatter torque profile
• Fuel Grades - Multiple octanes from which to choose
• Ethanol - Ethanol support from E60-E85 for maximum performance
• Acceleration - Accelerate faster with more power and reduced throttle lag
• Linear Throttle - Pedal maps adjusted for a more linear feel
• Brake Boosting - Left foot braking or brake boosting added
• Rev Limiter - Increased redline for higher revving
• Standing Limiter - Increased standing limiter for higher revving at idle
• Speed Limiter - Go as fast as you want with the speed limiter out of the way
• Auto Start/Stop Inversion - Auto Start/Stop defaults to the off position
• Exhaust Flaps - Enhanced power delivery and drivability through recalibrated exhaust flap actuation
• Quiet Mode - Keeps the exhaust valves closed in Normal mode, unless driving rapidly
• Added Safety - Additional safety features and protection modes added
• Economy - While cruising, or driving normally, your fuel economy may benefit from our optimized calibration
• Direct Port Programming - Clean and easy install through the OBD II port without removing the ECU
• Free Updates - Get free updates for life
• Guarantee - 30 day money back guarantee

Driving Modes, Features, and Safety

Driving Modes - Each upgrade offers a host of improvements beyond power alone. Using Porsche’s Normal, Sport, and Sport Plus modes offers varying levels of output while retaining all of the unique characteristics present in each mode. Sport and Sport plus modes give you full power and torque. Normal mode give you modest increase over stock. Optionally quiet mode is available, which keeps the exhaust valves closed in Normal mode, unless driving rapidly. Optionally a “Low Torque” file can be requested that limits torque similarly to normal mode, but retains sport mode like peak power levels. We’ve optimized boost, fueling, ignition, cams, and more to achieve greater power and torque in all scenarios.

Features - In Sport Plus mode we’ve reduced turbo lag during reapplication of the throttle by building boost while off the throttle. We have linearized the pedal maps for a more predictable throttle response curve, which works exceptionally well on the track. We’ve enabled left foot braking, and brake boosting. The speed limiter has been removed. We’ve optimized the software to better handle larger wheels without excessive torque interventions. And finally we’ve inverted the start stop functionality so the vehicle starts with this feature disabled.

Safety - With many customers tracking their Porsche, safety is paramount in our calibration strategy. Through the use of extreme datalogging equipment and additional sensors, thermocouples, and transducers, our engineers were able to fully optimize the ECU for advanced safety routines. This includes implementing several routines not enabled from the factory. The entire thermal management system is optimized to reduce engine bay temperature, and reduce intake air temperature, while also implementing advanced protection routines to prevent oil temperature from achieving unsafe levels. The exhaust crackles disable when temperature thresholds are crossed, and are only enabled in sport mode. Next, we help protect the engine from LSPI by preventing the engine from being lugged out in tall gears. We also protect the turbo from damaging compressor surge, and add in turboshaft overspeed protection. We’ve enabled new temperature protection routines to prevent the engine, exhaust, and other components from overheating, and have implemented temperature management strategies that are fully mindful of the platform’s limited fueling capabilities. We’ve optimized the injection strategy to not only deliver a fatter torque curve and better spool, but to reduce the chances of knock, and torque dips. This is also achieved alongside per cylinder ignition advance and fuel trimming.

APR ECU Upgrade Stages

APR’s ECU Upgrades support various octanes both with or without any hardware modifications. Each stage is fully compatible with an upgraded intake, intercooler, exhaust, or other minor bolt on modifications. Unlike many platforms, no “Stage 2” or additional software tweaks are required to properly utilize a high flow race DP exhaust system as the factory system poses minimal restriction.

APR STAGE 1

The APR Stage 1 ECU Upgrade is the first step towards making more power! This simple upgrade requires no engine hardware modifications, and produces 454-501 HP with 439-523 FT-LBS of torque, depending on octane. Gains as high as 102-155 HP and 111-195 FT-LBS of torque are available throughout the power band. To get more power, the vehicle can be outfitted with an upgraded intake, cooling, or exhaust system. Optionally manual transmission customers can request a lower torque file to help promote longevity on the factory clutch. Sport mode will have similar peak power, but torque will be capped similar to normal mode.  

APR Stage 1 is available for 91 AKI, 93 AKI, 100 AKI, 104 AKI, and E60-E85 fuel grades in North America, and 95 RON, 98 RON, 104 RON, 108 RON, and E60-E85 in the Rest of the World.

Please note, our E85 software is not a full flex fuel program. In this mode the engine is only designed to work on E85, as found directly at the pump, including both summer and winter blends from E60-E85. Using traditional pump fuels in this mode may result in engine damage. Do not manually blend with traditional pump fuel or race fuels or use race specific barrels of E85. To ensure proper E85 content levels, APR recommends using an E85 content sensor.

APR Stage 3 (GTS)

The APR Stage 3 GTS ECU Upgrade is the next step towards making more power! This simple upgrade only requires factory Porsche Carrera GTS turbos and no other engine hardware modifications, and produces 520-615 HP with 524-594 FT-LBS of torque, depending on octane. Gains as high as 152-228 HP and 196-266 FT-LBS of torque are available throughout the power band. To get more power, the vehicle can be outfitted with an upgraded intake, cooling, or exhaust system. With additional cooling we measured 565-648 HP with 548-594 FT-LBS of torque with gains as high as 185-262 HP with 220-266 FT-LBS of torque are available throughout the power band. Optionally manual transmission customers can request a lower torque file to help promote longevity on the factory clutch. Sport mode will have similar peak power, but torque will be capped similar to normal mode.  

APR Stage 3 GTS is available for 91 AKI, 93 AKI, 100 AKI, 104 AKI, and E60-E85 fuel grades in North America, and 95 RON, 98 RON, 104 RON, 108 RON, and E60-E85 in the Rest of the World.

Please note, our E85 software is not a full flex fuel program. In this mode the engine is only designed to work on E85, as found directly at the pump, including both summer and winter blends from E60-E85. Using traditional pump fuels in this mode may result in engine damage. Do not manually blend with traditional pump fuel or race fuels or use race specific barrels of E85. To ensure proper E85 content levels, APR recommends using an E85 content sensor.

APR SOFTWARE PRICING GUIDE

APR's performance software upgrade is available in multiple stages with optional features.